inkl. MwSt. zzgl. Versandkosten
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Artikel-Nr.: 4708694
- Zolltarifnummer: 8471419000
- Ursprungsland: Süd Korea (KR)
Der ODROID-C4 ist ein Einplatinencomputer der neuen Generation, der energieeffizienter und schneller arbeitet als der ODROID-C2, der vor über vier Jahren als weltweit erster erschwinglicher ARM-64-Bit-Computer eingeführt wurde.
Die Haupt-CPU des ODROID-C4 besteht aus einem Quad-Core Cortex-A55-Cluster mit einer Mali-G31-GPU der neuen Generation. Die A55-Kerne laufen mit 2,0 GHz ohne thermische Drosselung unter Verwendung des serienmäßigen Kühlkörpers, was einen robusten und leisen Computer ermöglicht. Die CPU-Multicore-Leistung ist etwa 40 % schneller und die System-DRAM-Leistung ist 50 % schneller als beim ODROID-C2.
Board Abmessung: 85mm x 56mm x 22 mm
Processor
Amlogic S905X3 12nm Processor
L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processors
Quad-Core Cortex-A55 (2.016GHz)
ARMv8-A architecture with Neon and Crypto extensions
Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)
Memory
DDR4 4GiB with 32-bit bus width
Data rate: 2640 MT/s (PC4-21333 grade)
1.2Volt low power design
Storage
1x eMMC connector (8/16/32/64GiB are available)
1x Micro SD slot (DS/HS mode up to UHS-I SDR104)
Networking
1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
– Realtek RTL8211F (Ethernet transceiver)
– LED indicators
* Green LED: Flashing by data traffic at 100Mbps connection
* Amber LED: Flashing by data traffic at 1000Mbps connection
Optional WiFi USB adapters
Video
1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
Audio
1 x HDMI digital output
1 x Optional SPDIF optical output
External I/O
4 x USB 3.0 Host ports (shares one single root hub)
1 x USB 2.0 OTG port for Host or Device mode. (No power input)
1 x Debug serial console (UART)
1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)
2x DC 5V, 2x DC 3.3V, 1x DC 1.8V, 8x GND
1x SPI
1x UART
2x I2C
6x PWM
2x ADC input (12bit, 1.8V Max)
25x GPIO (Max)
1x Audio Expansion Header (7-pin, 2.54mm pitch)
1x DC 5V
1x SPDIF out
1x I2S
– All 3.3V I/O signal level except for ADC input at max 1.8Volt.
Weitere Funktionen
IR receiver for remote controller
System LEDS Indicators:
– Red (PWR) – Solid light when DC power is connected
– Blue (ALIVE) – Flashing like heartbeat while Kernel is running.
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
DC input : 5.5V ~ 17V
– DC 12V/2A power adaptor is recommended
Power consumption:
– IDLE : ≃ 1.8W
– CPU Stress : ≃ 3.64W (Performance governor)
– Power-off : ≃ 0.14W