Hardkernel ODROID-H4 Ultra

Hardkernel ODROID-H4 ULTRA

• Schnellere CPU-Architektur Alder Lake N vs. Jasper Lake. Plus AVX2-Erweiterungen.
• Schnellere DRAM-Schnittstelle DDR5 4800 MT/s vs. DDR4 2933 MT/s.
• Höhere Basis- und Boost-CPU-Frequenzen und eine leistungsfähigere iGPU.
• Die Erhöhung von 2 auf 4 SATA-Anschlüsse ermöglicht den Anschluss einer größeren Anzahl von Speichergeräten, nur ODROID-H4+ und ODROID H4 Ultra.
• Ein zusätzlicher DisplayPort ermöglicht die gleichzeitige Nutzung von bis zu 3 Monitoren.
• Preiswertes ODROID H4 für Rechen- und Grafikanwendungen (z.B. Beschilderung, Roboter, Fabrikautomation,..)
• Das Flaggschiff H4 Ultra verdoppelt die Anzahl der CPU-Kerne, von 4 auf 8 Kerne. 

Processor

Intel 8-Core i3 N305 for ODROID-H4 Ultra

Memory

1 x DDR5 SO-DIMM slots

Single Channel, up to 4800 MT/s. Note: Dual rank r2x8 are better.

Max memory capacity 48GB

DDR3/DDR4 are not supported

Storage

1 x eMMC connector (bootable and selectable on BIOS)

Various eMMC modules can be purchased at Hardkernel store

4 x SATA3 6Gbps 

1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

Networking

2 x 2.5 GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

Intel I226-V

Supports Wake-On-Lan

LED indicators (Green: Link, Amber: Traffic)

Video

2 x DisplayPort 1.2 (up to 4K@60Hz)

1 x HDMI 2.0 (up to 4K@60Hz)

Triple simultaneous display support

Audio

1 x Audio out (3.5mm jack)

1 x Audio in (3.5mm jack)

1 x SPDIF out (ALC662, HDA codec)

 * HDMI & DP have audio output too.

External I/O

2 x USB 3.0 Host ports

2 x USB 2.0 Host ports

1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)

– 1 x DC 5V, 1 x DC 3.3V, 5 x GND

– 1 x UART (TXD/RXD/RTS/CTS 3.3Volt IO)

– 2 x I2C (SCL/SDA 3.3Volt IO)

– 1 x External Power Button

– HDMI CEC, 5VA+, D+,D- ( To use the HDMI-CEC function, an additional external adapter board must be installed )

– 3 x USB 2.0

Other features

Passive Heatsink

Dual BIOS on H4+ and H4 Ultra

BIOS Backup Battery ( All H series models include a backup battery by default )

– Maintains system time and BIOS settings

Power Button

Reset Button

System LEDS Indicators:

– Red (PWR) – Solid light when DC power is supplied

– Blue (left, SLEEP) – turns off only when the system enters into suspend mode

– Blue (right, PMIC) – turns on only when the major power rails are working

– Amber (SATA) – Flashes when SATA data transfers

– Green (NVMe) – Flashes when NVMe data transfers

Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)

– Active Cooling Fan is optional

– Connector (4-pin, 2.54mm pitch)

Processor

Intel 4-Core N97 for ODROID-H4 and H4+

Form Factor

120mm x 120mm x 47mm Approx.

Hardware Details

• A. CPU (Intel N97 or N305 )
• B. 1 x DDR5 SO-DIMM slots (Single channel memory support)
• C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
• D. 1 x eMMC (Embedded Multimedia-Card) Socket
• E. 4 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
• F. 4 x SATA3 6.0 Gb/s Data Connectors
• G. 1 x DC Power Jack
• H. 2 x USB 3.0
• I. 2 x USB 2.0
• J. 1 x HDMI 2.0
• K. 2 x DisplayPort 1.2
• L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
• M. 5 x System LED Indicators
• N. 1 x Peripheral Expansion Header (24-pin)
• O. 1 x Power Switch
• P. 1 x Reset Switch
• Q. 1 x Backup Battery Connector (2-pin)
• R. 1 x Active Cooling Fan Connector (4-pin)
• S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out

Block diagram